Sunday, 4 October 2020

From the J-10A to the J-10C, the J-10 fighter has not only improved its performance, but also its appearance

J-10B - Sunson Guo


从歼10A到歼10C,歼10战斗机不仅性能提升,颜值也越来越高!_服役

Translated by google

2020-10-03

The J-10 fighter jet looks higher and higher

The J-10 is the first three-generation fighter independently developed by my country. The J-10 fighter adopts a single-engine duck aerodynamic layout. The first J-10 is an air superior fighter. With continuous improvement, the J-10 fighter is now available. Strong multi-functional combat capability, while maintaining air control performance, it can also mount precision guided weapons such as the Eagle-91 anti-radiation missile for precision ground strikes, and combat capabilities are becoming more and more comprehensive!

The J-10 fighter jet looks higher and higher

Recently, some media released a set of pictures of the actual combat training of Air Force J-10C fighters. As you can see from the picture, the J-10C fighter uses a low-visibility coating, and even the "August One" logo on the tail is also a low-visibility design. The J-10C fighter jets with low-visibility paint look more and more refined, and their appearance is getting higher and higher. An advanced fighter jet must have a beautiful appearance. How can the performance of the J-10C be fully reflected in its appearance!

J-10C fighter

The development history of the J-10 fighter

The development of the J-10 fighter has gone through three stages so far. The first stage is the J-10A fighter. The J-10A entered service in 2004 and is a standard third-generation fighter. However, when the J-10A entered service, my country’s strength in the field of aviation research and development was relatively weak. Therefore, some designs of the J-10A body are not particularly mature today. For example, In order to enhance the structural strength of the airframe, 6 stiffeners are added above the air inlet.

F-10C fighter cockpit

After the J-10A entered service, my country's aviation manufacturing technology has achieved leapfrog development. Therefore, the overall design of the J-10B has been greatly optimized, the stiffeners have been eliminated, and the passive phased array radar is equipped. The overall performance of the latest J-10C has been further improved. The J-10C has greatly improved the body design, such as the redesigned nose layout for the equipment of high-power active phased array radar. In addition, the J-10C’s airborne avionics Both the system and the weapon system adopt the most advanced technology made in China, realizing the leap from the third generation to the three and a half generations of the J-10 series fighter.

J-10C uses low-visibility coating

J-10 will continue to improve

Before the J-10 entered service, the Air Force fighters consisted of a small number of Su-27 (J-11) and a large number of second-generation fighters. Therefore, the J-10 faced a heavy task of reloading after serving. The current total number of J-10 series fighters has exceeded 600, making it one of the most equipped fighters in active service in the world, second only to F16 in scale! The J-10 fighter has the advantages of advanced performance but low manufacturing cost and simple and convenient maintenance. The latest 10C is still in continuous production.

The J-10 fighter will continue to improve performance

The air superiority performance of the J-10C is not inferior to that of fighters such as F16V and Rafale, but the J-10C will not be the last model of the J-10 series. CCTV has previously publicly reported that the J-10 family is about to usher in a new member! The next modification of the J-10 may focus on the power system to improve engine performance and further enhance the structural strength of the airframe to improve its multi-functional combat capabilities. In addition, the latest modification of the J-10 may have strong stealth performance, making it reach the level of a "quasi-stealth" fighter.


No comments:

Post a Comment